Zu den Hauptinhalten springen

The cosTherm product family offers a wide choice of modern materials for use in mould-making, toolmaking and press manufacture that cover the entire application spectrum. The field of press manufacturing in particular makes selective use of material combinations in multi-layered designs to guarantee optimum temperature management.

Contact us now!

Material - CosTherm

The diverse cosTherm product spectrum, consisting of thermosetting, mica and calcium silicate materials offers custom solutions that cater for:

  • High temperature stability

  • Very low thermal conductivity

  • High load changes

For additional applications, there are special solutions such as moulded mechanical engineering parts or coatings to reduce the chemical exposure of the components.

cosTherm® material properties

Product name Operating temperature Compressive strength at 23°C
cosTherm® 4000 200° C 320 N/mm²
cosTherm® 4000 plus 230° C 450 N/mm²
cosTherm® 1600 210° C 600 N/mm²
cosTherm® A.550 550° C -
cosTherm® E.210 210° C 600 N/mm²
cosTherm® E.230 230° C 650 N/mm²
cosTherm® E.230 HD 250° C 750 N/mm²
cosTherm® P.250 250° C 650 N/mm²
cosTherm® S.280 280° C 450 N/mm²
cosTherm® G.500 500° C 400 N/mm²
cosTherm® G.700 700° C 340 N/mm²
cosTherm® FH.400 400° C 9 N/mm²
cosTherm® 4000A 200° C 100 N/mm²
cosTherm® AE - Ausgleichseinlage 210° C -
cosTherm® SL.20 210° C 250 N/mm²

Sample Solutions

Bucks

We produce a range of components and parts for glass manufacturing machines and glass blowing machines, such as bucks, cooling boards, stackers, transverse belts, grippers and levers.

Gripper fingers

Gripper fingers have component-specific contours at their ends that enable them to pick up, grip, transport or guide components. They are used primarily in electronics manufacturing.

Complex 3D components for thermal insulation

The manner in which these insulation materials are implemented can be as varied as the requirements placed on them: from a simple intermediate layer all the way to complex 3D components with various material combinations that are produced on a 5-axis…

Blank holders

Blank holders serve to hold components securely in position in the application. They are typically held against a surface/contour.

Heat insulation board

DOTHERM and ISOCOS offer heat protection plates that are precisely adapted to the respective process requirements in terms of material, compression strength, temperature resistance and dimensional stability.

Non-material-specific insulation solutions

In many industrial applications, it makes sense to use multi-layered materials or material combinations.

Show more Show less